nieuwe zoekopdracht
[ meld een fout in dit record ]mandje (0): toevoegen | toon Print deze pagina

The turbidity maximum in a mesotidal estuary, the Tamar Estuary, UK: II. The floc properties
Dyer, K.R.; Bale, A.J.; Christie, M.C.; Feates, N.; Jones, S.; Manning, A.J. (2002). The turbidity maximum in a mesotidal estuary, the Tamar Estuary, UK: II. The floc properties, in: Winterwerp, J.C. et al. (Ed.) Fine sediment dynamics in the marine environment. Proceedings in Marine Science, 5: pp. 219-232
In: Winterwerp, J.C.; Kranenburg, C. (Ed.) (2002). Fine sediment dynamics in the marine environment. Proceedings in Marine Science, 5. Elsevier: Amsterdam. ISBN 0-444-51136-9. XV, 713 pp.
In: Proceedings in Marine Science. Elsevier: New York. ISSN 1568-2692; e-ISSN 2352-2860
Peer reviewed article  

Beschikbaar in  Auteurs 

Trefwoord
    Marien
Author keywords
    Flocculation; settling velocity; floc size; turbulence; suspended sediment concentration; turbidity maximum; Tamar Estuary

Auteurs  Top 
  • Dyer, K.R.
  • Bale, A.J.
  • Christie, M.C.
  • Feates, N.
  • Jones, S.
  • Manning, A.J.

Abstract
    Measurements have been carried out in the turbidity maximum of the Tamar Estuary at neap and spring tides of floc size, settling velocity and effective density. These measurements were complemented by suspended sediment concentration and turbulence profiles. The overall dynamics of the turbidity maximum have been presented in the companion paper (Part I), and form a context for the results presented here. The floc size increased from about 50 to about 350 microns across the turbidity maximum, and settling velocity changed from 0.0-6.0mms-1. The equivalent change in floc effective density was 50-750kgm-3. Within the turbidity maximum the proportion of macroflocs (>160 microns) increased. The changes in floc properties were correlated with changes in concentration and the turbulence parameter G, the root mean square of the gradient in turbulent velocity fluctuations. An empirical equation representing the settling velocity Ws (mms-1) in terms of SPM (mgl-1 ) and G (s-1) is: Ws = -0.243 + 0.000567SPM + 0.981G - 0.0934G².

Alle informatie in het Integrated Marine Information System (IMIS) valt onder het VLIZ Privacy beleid Top | Auteurs 
IMIS is ontwikkeld en wordt gehost door het VLIZ, voor meer informatie contacteer .